portal

Archive

  1. Fabrication and Welding : Evening Classes for MIG, TIG, MMA

    Comments Off on Fabrication and Welding : Evening Classes for MIG, TIG, MMA

    Course Code: 72157-01

    Please note that these courses are only available for students aged 19+.

    These evening courses are specifically for people who have a keen interest in welding, and want to further that knowledge and skills in this discipline.

    This can be done as a stand-alone qualification purely for the student, as an addition to an apprenticeship framework, or requested by businesses to up-skill their employees.

    Due to this, there could be a wide range of people with varying levels of expertise in the class.

    The courses mentioned above are detailed as such:

    • MIG – Manual Inert Gas
    • TIG – Tungsten Inert Gas
    • MMA – Manual Metal Arc

    When applying please specify which of the above course you are wanting to apply for.

  2. Fabrication & Welding – Level 3 Diploma in Engineering (F&W)

    Comments Off on Fabrication & Welding – Level 3 Diploma in Engineering (F&W)

    Course Code: 73025-01

    Focusing on the major disciplines within engineering the learner will gain the knowledge and hand skills needed to develop or build on a successful career in engineering and fabrication and welding.

  3. Advanced Apprenticeship in Fabrication & Welding

    Comments Off on Advanced Apprenticeship in Fabrication & Welding

    Multi-Positional Welders will have the skill to produce good quality welds in pipe and/or plate using three welding process/material type combinations (TIG, PAW, MMA, MIG/MAG, FCAW) and (Carbon and Low Alloy Steel, High Alloy Ferritic/Martensitic Steel, Austenitic Stainless Steel, Nickel and Nickel Alloys, Aluminium and Aluminium Alloys) covering all welding positions (Downhand, Horizontal, Vertical, Overhead, Inclined).

    Apprentices should be able to position, assemble, prepare and check the welding equipment and also receive, handle and maintain consumables. They will prepare, check and protect materials and work area ready for welding when at college. Apprentices will weld preparation and assembly prior to welding and accept for production.

    They should complete progressive and final checks on the finished weld prior to release for formal inspection and report into the production control system. Students will ensure that health and safety requirements are fully accounted for all of the above.

    If you have any enquiries, please don’t hesitate to contact our apprenticeships team on apprenticeships@keighleycollege.ac.uk or call us on 01535685035.

  4. General Welder – Intermediate Apprenticeship

    Comments Off on General Welder – Intermediate Apprenticeship

    The apprentice will gain both technical knowledge and real practical experience, along with functional and personal skills. These are acquired through a mix of learning in the workplace, formal off-the-job training and academic study at college.

    The apprentice will learn the mechanical properties and weldability of welded materials and will gain an understanding of the common arc welding processes, joint types (fillet, lap, butt, etc.) and positions.

    The apprentice will also gain an understanding of the the major components of welding equipment, essential parameters for welding, the terminology, operation and controls for the selected arc welding processes, joint types and welding positions.

    The apprentice will be able to identify and understand the causes of typical welding defects and how their occurrence can be reduced, for the materials and welding processes selected and to also understand the functions of welding consumables and the requirements for correct storage and handling.

    The apprentice will be able to identify and select correct welding consumables for each application and understand and identify hazards and basic health, safety and quality requirements when welding.

    The pathways in this apprenticeship are; Welding, Sheet, Plate or Structural Steel.

  5. Improving Operational Performance – Fabrication and Welding Intermediate Apprenticeship (Level 2)

    Comments Off on Improving Operational Performance – Fabrication and Welding Intermediate Apprenticeship (Level 2)

    The Fabrication and Welding Intermediate Apprenticeship has been designed for individuals whose role involves dealing with general fabricated items ranging from catering equipment, ductwork and canopies for hotel kitchens to structural components such as building conversion steelwork to off shore oil platforms and subsea components. The Level 2 Certificate is aimed at individuals who undertake a broad range of activities that are often less routine and demand some level of independence or responsibility.

    E: apprenticeships@keighleycollege.ac.uk
    T: 01535 685035

  6. Improving Operational Performance – Fabrication and Welding Advanced Apprenticeship (Level 3)

    Comments Off on Improving Operational Performance – Fabrication and Welding Advanced Apprenticeship (Level 3)

    The Fabrication & Welding – Plate working or sheet metal, Advanced Apprenticeship has been designed for individuals who are in a position of responsibility; including the supervising/overseeing of other staff and dealing with challenging issues. They are likely to deal with development of complex fabricated items which require technical drawing skills, production and development of weld procedures, problem solving and design and research activities of fabricated components.

    E: apprenticeships@keighleycollege.ac.uk
    T: 01535 685035

  7. Fabrication & Welding – Level 2 C&G Technical Diploma

    Comments Off on Fabrication & Welding – Level 2 C&G Technical Diploma

    Course Code: 73036-01

    This course is only available for students who already have some experience and knowledge of fabrication and welding. Candidates who do not have prior experience, knowledge and a PEO qualification (or industry equivalent) will not be considered for this particular course. However, we do run other courses in the field that might be better suited for you – please take a look here.

  8. Fabrication & Welding – Level 1 Award (C&G)

    Comments Off on Fabrication & Welding – Level 1 Award (C&G)

    Course Code: 74281-01

    This course is for learners who are just starting out in their engineering career and require a broad range of competencies to enable safe progression to higher level engineering qualifications or into the workplace. This is an exciting and established career pathway which can provide a lot of benefits in the near future.

Latest Tweets

accreditations

Contact

Keighley College

Bradford Road, Keighley
West Yorkshire BD21 4HQ United Kingdom

Tel: 01535 685000
Student Absence Line: 01535 685109 / attendance@keighleycollege.ac.uk
Email: enquiries@keighleycollege.ac.uk

Exams Email: exams-KLY@leedscitycollege.ac.uk